3.1. INSTALLATION - BRACKET
The bracket makes it possible to:
• Mount the device on the wall in vertical position or inclined
at 45° or 60°.
• Mount the device under the ceiling in horizontal position or
inclined at 45° or 60°.
• It is possible to rotate it along the points of the bracket
connection with the unit.
The bracket is not standard equipment of the heater. It is ordered
separately and delivered together with elements necessary for its
installation.
Expansion bolts are not included in the set. Type of the bolts
should be chosen appropriately to the type of the wall.
3.2. ASSEMBLY INSTRUCTIONS
M8 screws are in set with bracket | les vis M8 sont incluses avec la console
NT 1675 I - 05/2021
3.1. MONTAGE - CONSOLE
La console permet :
• Installation de l'aérotherme sur la paroi en position verticale
sous un angle de 45° ou à un angle de 60°.
• Pivotement de l'appareil autour de l'axe de connexion entre
la console et l'appareil.
La console ne fait pas partie de l'équipement basique de
l'aérotherme.
Elle est livrée en option avec tous les éléments de montage
nécessaire.
Les boulons à expansion ne sont pas inclus. Il est nécessaire de
sélectionner les boulons appropriés.
3.2. INSTRUCTIONS DE MONTAGE
13