GPO CD122D Mode D'emploi page 11

Using an AC adaptor (NOT SUPPLIED)
1. Insert the DC plug (at the end of the AC adaptor cord) into the DC
input jack (9)
2. Plug the AC adaptor into a 220/230V~ 50Hz AC power socket.
3. The CD Player will automatically disconnect from using battery
power and operate using the AC adaptor.
IMPORTANT!
• Only use an adaptor with an output voltage rated as DC 4.5V 650mA,
with a centre negative plug.
Earphones
• Please do not use earphones while driving, cycling or operating any
motorised vehicle.
• Do not play your earphones at high volume while walking, especially
when crossing roads as this can be dangerous.
• Avoid using earphones at high volume. Hearing experts advise
against continuous, loud and extended play. If you experience a
ringing in your ears, reduce volume or discontinue use.
• Always keep volume at a moderate level so you are able to hear
outside sounds and take those around you into consideration.
• Keep clean using a soft, dry cloth.
• Never immerse in water.
11