GPO CD122D Mode D'emploi page 10

The CD Player is powered with either two AA (UM-3) batteries or an
AC adaptor. Please note: Both the batteries or AC adaptor are not
supplied.
Using batteries (NOT SUPPLIED)
1. Open the battery compartment (11) on the back of the CD player by
sliding open and gently pulling upwards the battery door.
2. Check the polarity (+/-) inside the battery compartment.
3. Insert two AA (UM-3) batteries according to the polarity.
4. Re-close the battery door.
For best performance and extended operating time, we recommend
using alkaline batteries.
IMPORTANT!
• Please always ensure batteries are correctly installed. Incorrect
polarity can damage your Personal CD Player.
• Never mix old and new batteries.
• Never mix alkaline, standard (carbon-zinc) and rechargeable (nickel-
cadmium) batteries.
• If you are not planning to use your Personal CD Player for an
extended period of time, always remove the batteries. Old or leaking
batteries can cause damage to the unit and may void the warranty.
• Never dispose of batteries in a fire - batteries can leak or explode.
10