Maintenance; The Water Inlet Filter; The Drain Pump Filter - LG WM3431H Serie Manuel D'utilisation

M aintenance
❋ Before cleaning the washer interior, unplug the electrical power cord to avoid electrical shock
hazards.
❋ When disposing of the appliance, cut off the mains cable, destroy the plug, and disable the door
lock to prevent young children being trapped inside.

The water inlet filter

- " " error message will blink on the control panel when water does not enter the
detergent drawer.
- If your water is very hard or contains traces of lime deposit, the water inlet filter may
become clogged. We recommend cleaning it every few months.

The drain pump filter

❋ The drain filter collects threads and small objects left in the laundry.
Check regularly that the filter is clean to ensure smooth running of your machine.
Drain, using the drain hose, before opening the pump filter to remove objects.
• Allow the water to cool down before cleaning the drain pump filter.
1. Open the lower cover
cap ( ) with a tool
such as coin.
Turn the drain plug
( ) to pull out the
hose.
1. Turn off the
water tap.
3. Clean the
filter using a
hard bristle
brush.
CAUTION
Be careful when draining if the water is hot.
2. Unplug the drain plug ( ),
allowing the water to flow out.
At this time use a vessel to
prevent water from flowing
onto the floor. When water
does not flow any more, turn
the pump filter ( ) open to
the left.
2. Unscrew the
water inlet
hose.
4. Tighten the
inlet hose.
3. Remove any foreign
objects from the pump filter
( ). After cleaning, turn the
pump filter ( ) clockwise
and insert the drain plug
( ) to the original place.
Close the lower cover
cap( ).
17