SmartShare PC SW Installing & Setting
1 Install the SmartShare PC SW programme on your PC.
2 Go to
. Then, select your region.
3 Select Support.
4 Select Software & Drivers. Then, select SmartShare.
5 Download the SmartShare PC SW and install it on your PC. You can run the program when installation is
complete.
NOTE
y Smartshare service is only available if TV and other devices are connected via a single AP (Router).
SmartShare Connection to Smartphone
1 Check that Wi-Fi is enabled on your smartphone. To use SmartShare, both devices must
on the same local network.
2 Install/run the app for sharing content on your smartphone (It's called LG TV Plus on LG
phones).
3 Enable your smartphone to share content files with other devices.
4 Open Device Connector application.
(Home) → Device Connector → Smartphone → CONTENT SHARE.
5 Select the file type you want to play (movie, audio or photo).
6 Select a movie, music or photo file to play on the TV.
7 Play the media file to view and enjoy it on your TV.
* If the TV is turned on for the first time after it was shipped from the factory, initialization of the TV may
take a few minutes.
(Home) →
(Settings) →
1
UPDATES
2 After checking the version of the software, update it.
If you check the "Allow Automatic Updates", you can update the software automatically.
Updating the TV Firmware
) (All Settings) →
(
GENERAL
Picture
Eco Mode
Sound
Mobile TV On
Channels
Network
LG Wireless Keyboard
Settings Help
General
No Signal Image
Safety
Reset to Initial Settings
About This TV
Accessibility
User Agreements
General → About This TV → CHECK FOR
ABOUT THIS TV
Picture
General /
Sound
Software Version
xx.xx.xx
Allow Automatic Updates
ꔐ
Channels
CHECK FOR UPDATES
Network
TV Information
General
User Guide
Safety
Open Source Software Notice
Set ID : 1
Accessibility