Publicité
Les langues disponibles
Les langues disponibles
LED OUTDOOR FLOOD LIGHT
INSTALLATION INSTRUCTIONS
KNUCKLE MOUNT: INSTALLATION INSTRUCTIONS
1. Adjust the two screws turn the fixture left and right, up and down (FIG. 1).
2. Secure service wire or conduit to the wiring compartment cover with ½" connector (not provided). Connect white fixture
wire to white supply wire, black fixture wire to black supply wire. Service ground should be attached to green ground screw
provided. Ground must be properly attached to avoid the risk of electrical shock. Use wire nuts to connect all wires. Make
sure connections are secure and that no loose wire strands are sticking out of connectors. Secure wiring compartment
cover to the fixture. Use UL and cULus Listed weather proof outlet box cove (FIG. 2).
FIG.1
YOKE MOUNT: INSTALLATION INSTRUCTIONS
1. Use expansion bolts to secure the fixture on mounting surface (FIG. 1).
2. Keep enough wire length to ensure adjusting angle unhindered.
3. Connect wires into wiring terminal; white wire to "Neutral" terminal, black wire to "Live" terminal, green wire to "Ground"
terminal; and fix them by screws.
4. Adjust the fixture to the desired orientation, tighten the screws.
5. Use cULus Listed Weather-proof outlet box cove (FIG. 2).
FIG.1
FIG.2
FIG.2
Publicité
