Setting The Alarm - Proline IP220 Manuel D'instructions

Operating Instructions
Setting the Clock
a.
With the power off, hold the CLOCK SET button.
b. Press the SEARCH/TUNE down or up buttons to toggle between 12HR and 24HR
time, and press the MEM/CLK SET button to select either option.
c. Press the SEARCH/TUNE up button to cycle up through the hours, or press the
SEARCH/TUNE down button to cycle down through the hours. Press the MEM/
CLK SET button to select the hour.
d. Press the SEARCH/TUNE up button to cycle up through the minutes, or press the
SEARCH/TUNE down button to cycle down through the minutes. Press the MEM/
CLK SET button to select the minute, and finish setting the time.

Setting the Alarm

a.
Press the ALARM SET 1 button.
b.
Press and hold he ALARM SET 1 button.
c.
Press the SEARCH/TUNE up button to cycle up through the hours, or press the
SEARCH/TUNE down button to cycle down through the hours. Press the ALARM
SET 1 button to select the hour.
d.
Press the SEARCH/TUNE up button to cycle up through the minutes, or press the
SEARCH/TUNE down button to cycle down through the minutes. Press the ALARM
SET 1 button to select the minute.
e.
Press the SEARCH/TUNE up button to cycle up through the different alarm modes
(Radio, Buzzer, or iPod). After a mode is selected press the ALARM SET 1 button
to finish setting the alarm.
NOTES: This operation also applies to setting alarm two.
8
All manuals and user guides at all-guides.com
continued