Acoustic Research AWSF6RBK Guide De Démarrage Rapide page 4

Adding Speakers (Stereo Mode)
If you have a second AR Sedona wireless speaker, you can use it together
with this one in stereo mode. To use 2 AR Sedona speakers together
in stereo mode:
1. Turn on both speakers. (Press and hold the Power/Pair button on the
back of each.)
2. Press and hold the Add Speaker button on the back of the first
speaker until the Power/Pair light starts flashing white.
3. Press and hold the Add Speaker button on the back of the second
speaker until its Power/Pair light starts flashing white.
4. The speakers announce "left connected" and "right connected" when
they're ready to play in stereo.
Once the speakers are connected with each other, the left speaker will
try to pair to your phone (its Power/Pair light will blink fast). Find the
AR Sedona in your phone's Bluetooth menu and connect to it. Once
the speakers are connected to your phone, the right speaker's Power/
Pair light will go solid white. The left's Power/Pair light also goes solid
white and blinks off every 5 seconds. Keep your phone close to the left
speaker—that's the one it's connected to!
Using the Lighting Modes
The Lighting Mode button gives you control over this speaker's built-
in flame lighting. You can use the lighting whether the speaker's on
or off.
Press the Lighting Modes button to cycle through the multiple
lighting modes:
Big Flame and Small Flame provide different levels of the
speaker's flame lighting effect.
Pulsing Flame provides a flame effect that pulses to the beat of
your music.
White Light provides a soft white light.
Off turns the speaker's lighting off.
4
Power/Pair
DC In
Power/Pair
Volume
DC In
Add Lighting
Speaker
Volume
Aux In
Power/Pair Add Lighting
Volume Speaker Modes
DC In Aux In
Speaker back
Add Lighting
Speaker Modes
Aux In
Power/Pair Add Lighting
Volume Speaker Modes
DC In Aux In
Speaker back
Modes