Intended Use; Delivery Contents; Safety Instructions; General - BASETech 81 46 77 Mode D'emploi

1. Intended use

Using this multi-talented device and its comprehensive range of accessories you can drill, polish
and grind. It is equipped with a collet chuck for the most diverse of tools. In addition, this handy
electrical power tool is equipped with a flexible shaft, making it easier to work on hard-to-access
spots.
To quickly and easily change the tool, the boring bar can be locked into position with the press of
a button. The collet chucks are made of corrosion-resistant brass to guarantee perfect tool fitting.
The speed regulator allows for material-specific treatment of the most diverse of workpieces.
Any usage other than described above is not permitted and can damage the product and lead
to associated risks such as short-circuit, fire, electric shock, etc. Please read the operating
instructions thoroughly and keep them for further reference.

2. Delivery contents

• Mini drill unit
• flexible shaft
• Complete set of tools and accessories
16

3. Safety instructions

We do not assume liability for resulting damages to property or personal injury
if the product has been abused in any way or damaged by improper use or
failure to observe these operating instructions. The warranty will then expire!
An exclamation mark in a triangle indicates important information in the
operating instructions. Carefully read the whole operating instructions before
operating the device, otherwise there is risk of danger.
A) General
• Non-approved conversions and/or modifications to the device are not permitted for safety and
regulatory reasons (CE).
• The device conforms to protection class I. It is only suited for connection to 20V~/50 Hz
power supply.
• The connector of the device must fit into the socket. The connector must in no way be altered.
Do not use any adapter connector with grounded devices.
• When using extension cords, ensure that the cable is completely unwound, adequately
dimensioned and well-suited to the surrounding conditions.
• At industrial facilities, the accident prevention regulations of the association of the industrial
trade association for electrical systems and equipment must be observed.
• In schools, training facilities, hobby or self-service workshops, handling of electrical devices
must be monitored by trained personnel.
• Maintenance, adaptation and repair work must only be carried out by an expert or at a
specialized shop.
• If you should still have questions that are not answered in these operating instructions, please
contact our technical customer support or other expert.
17