Zepter Therapy Air iOn PWC-570 Manuel D'utilisation page 23

4 C leaning the particle sensor
(once every two months)
• Open the cover of the particle sensor on the
right side of the appliance. Use a slightly
damp cotton bud (Q-tip) to clean the lens
and collect any remaining moisture.
4 C leaning the air inlets and outlets
Clean the air inlets and outlets with a soft brush.
Take care not to drop the brush into the appliance.
4 C leaning the negative ion generator
(once every two months)
Use a dry cotton bud (Q-tip) to dust the tag.
Take care not to drop the cotton bud (Q-tip) into the
appliance.
4 C leaning the front cover
• Remove the front cover of the appliance and use a dry
cloth or soft brush to dust it.
If necessary, use a slightly damp cloth, but no polishing
agents.
4 Cleaning the lens on the back of the cover
(once every two months)
Remove the front cover of the appliance and use a dry
cloth, a soft brush or a cotton bud (Q-tip) to dust the
mood light on the back of the front cover. If necessary,
use a slightly damp cloth, but no polishing agents.
Cleaning the pre-electrostatic filter (once every 2-4 weeks)
OPERATING INSTRUCTIONS
1. 2.
EN
3.
23