Motion R12 Série Guide De L'utilisateur page 5

Step 2: Pair the keyboard
To pair your keyboard with your R12 Tablet PC:
1. Ensure that your tablet is powered on.
2. If you're running Windows® 7, open Motion Dashboard, tap Pen and Tablet, and select the
checkbox beside Enable R12 Keyboard.
3. If you're running Windows® 8.1, open Motion Tablet Center, tap Power, and tap the switch
beside Companion Keyboard to turn it on.
4. Attach the keyboard to the back of the tablet as shown in the photo.
During the pairing process, the LED status light on the top of the keyboard will change colors and
states as described in the table below.
LED Color
Green
Green
Amber
Amber
Green
R12-Series Companion Keyboard User's Guide
Behavior
Three-second
slow blinking
Blinking
Blinking
Steady on
One-second
blink
Status
The keyboard is pairing with the Tablet PC (if the
keyboard is powered on).
If the keyboard is powered off and inserted into the
kickstand, the LED blinks quickly to indicate power on, it
then blinks slowly to indicate pairing in progress.
Keyboard is powering off.
The keyboard is charging.
The keyboard is powered on (when keyboard is
detached from the Tablet PC).
5