Faqs; Additional Information; Fault Finding - Cole-Parmer CB-200 Serie Manuel D'instructions

FAQ'S
Q1 How can I cool the beads more quickly?
A1 If you intend to use the CB-200D-IB to keep samples cool, then the bucket and beads
can be stored in a refrigerator and then inserted into the unit when required.
Q2 Is it possible to sterilise the beads?
A2 Yes. Place the beads in a suitable container and autoclave as you would for sterilising other
equipment. The beads can be autoclaved at up to 134°C.
If you require further technical or application assistance please contact Antylia Scientific at:
Antylia Scientific Ltd.
Service Department,
Beacon Road,
Stone,
Staffordshire,
ST15 0SA,
Email: cpservice@antylia.com
Phone: +44 (0)1785 810475
If you require further technical or application assistance please contact:
Email: cptechsupport@antylia.com
Phone: +44 (0)1785 810433
We are continually striving to improve our products and software. If you have any comments and
suggestions on how we can do things better please send them to us at: cptechsupport@antylia.com

ADDITIONAL INFORMATION

Note that this equipment should only be dismantled by properly trained personnel. Removing
the outer cover exposes potentially lethal mains voltages. There are no user serviceable parts within this
equipment.

FAULT FINDING

Should you have any problems with your CB-200D-IB which cannot be easily remedied, you
should contact your supplier and return the unit if necessary. Please include details of the fault
observed and remember to return the unit in its original packing. Antylia Scientific accepts no
responsibility for damage to units which are not properly packed for shipping: if in doubt, contact
your supplier, giving the full serial number of the unit.
20