Certificate No. AM VR2 - 1507 - 120 EU
TÜV SÜD Industrie Service GmbH, Test Body for Vapour Recovery Systems,
Westendstr. 199, D-80686 Munich
Industrie Service
^
£ CS
^
hereby certifies that it has tested the following automatic monitoring System for petrol vapour recovery Systems
according to EN 16321-1, Appendix D:
Type of System:
Product name:
Manufacturer:
System components:
Obligatory other
components:
De-activation time:
Basic configuration of an "Automatic monitoring System"
VAPORIX II
FAFNIR GmbH, Hamburg, Germany
Gas flow sensor:
VAPORIX-Flow
Evaluation board:
VAPORIX-Control II
Alternative:
•
Dispenser Computer head /
•
Site Controller
•
VAPORIX-PCM 2
These obligatory other components are needed for:
De-activation time control, alarm Signals, de-activation of fuelling point
To be set by the manufacturer only:
E. g. 72 h; 168 h; other
Indication of de-activation time:
Flashing green LED "Status" on "VAPORIX-Control ll" board.
The number of consecutive flashes multiplied by 24 shows the
de-activation time in hours.
(E. g. 3 consecutive flashes = 72 h;
7 consecutive flashes = 168 h)
Based on ID "AM VR2 - 1507 - 120 EU VAPORIX II"
The monitoring System for vapour recovery Systems corresponds to the state of the art as defined in
"Directive 2009/126/EC" last amended by Directive 2014/99/EU".
This certificate is only valid in conjunction with a valid supplementary certificate for one of the
obligatory components as specified above.
Germany, Munich, 06/10/2022
Expiration date for placing on the
market
05/10/2027
Test Body for Vapour Recovery Systems
Peter Szalata
TÜV SÜD Industrie Service GmbH • Zertifizierstelle • Westendstrasse 199 • 80686 München • Germany
TIAA