Factory Default; Camera Specifications - Defender ST300-SD Mode D'emploi

DVR SETTINGS

factory Default

This option allows you to set your ST300 back to its factory default settings, precisely
the way the unit came out of the box.
To set factory default:
1. Select the factory default option from the main menu. You will be prompted:
"RECALL DEfAULT NOW?"
2. To restore your ST300 to factory default press the joystick button to signal yes.
3. To cancel resetting your ST300 to factory defaults, press the "STOP" button to cancel.

CAMERA SPECIfICATIONS

Image Sensor
Resolution
Outdoor Use
focal Length
focus Type
Min. Illumination
ST300-SD
1/6" Color CMOS Sensor
640 x 480
No
Board Lens f3.62mm / F2.8
Fixed
2 lux
System Status Menu
Motion Detection
Viewing Angle
BLC
AGC
White Balance
Signal Noise
Yes
66 Degrees
Auto
Auto
Auto
46 dB
16