Operation With Imou App; Installing Device - IMOU IPC-C26EP- Guide De Démarrage Rapide

3

Operation with Imou App

Step 1 Connect the device to power source with the power adapter.
Step 2 Connect your smartphone to your Wi-Fi network and scan the"Imou" QR
code on the packing box. Then download and install the Imou App.
Step 3 Run Imou App, and register an account for first use.
Step 4 Follow the steps below to add device (Figure 3-1).
Note
- If you have more than one device, follow step 4 to add them one by one.
- If the Wi-Fi network changed, reset the device and follow step 4 to add it again.
4

Installing Device

Note
Make sure the mounting surface is strong enough to hold at least
three times of the device weight.
Step 1 Drill screw holes on the mounting surface as the installation position map
shows and put in the expansion bolts.
Step 2 Open the bracket and pull the power cable through the cable tray on the
bottom.
Figure 3-1
3