Digitus DN-80118 Guide D'installation Rapide page 4

Plugging in the AC Power Cord
You can connect AC power supply cord to switch back and the other side connect the
power outlet (power outlet might as well grounding and support over voltage
protection).
INPUT: 100 -240 V AC
Warning: Do not turn on the power switch before power cables are connected.
Power surge may cause damage to the Switch.
Power failure: As a precaution, the switch should be unplugged in case of power
failure. When power is resumed, plug the switch back in.
Network Connection
① + ②: IP camera, ③ + ④: Camera, ⑤: Network video recorder
Cable: Cat 5 and higher
4