Battery And Charging - BEZIOR SmartEV/Moped M1 Instructions

Precautions

Battery and charging:

Charging is only allowed at 0°C~45°C, and discharging is only allowed at
-20°C~60°C. The battery must be kept dry. It is strictly prohibited to put
the battery in acidic or alkaline liquid. Rain must be avoided, and it shall
be kept away from fire, heat and high temperature environment. It is
strictly prohibited to reverse the battery's positive and negative poles or
damage them, plug in the battery or let it suffer from short circuit. Please
use the original special charger when charging. The charging must not
last more than 6 hours, and the charging current does not exceed 2A.
When not in use for a long time, please keep the battery in a cool and dry
place, and charge it for five hours every month. Users must follow the
instructions when charging, otherwise they will be at their own risk.
Attention shall be paid to the type of battery to which the charger is
compatible and the applicable voltage, and mixing is strictly prohibited.
When charging, it shall be placed in a ventilated environment. It is strictly
prohibited to charge in a residential building and in an enclosed space or
in a hot environment. When charging, insert the battery first, and then
supply the mains power; when fully charged, cut off the mains power first,
and then unplug the battery connector. When the green light is on, the
power shall be cut off in time. It is forbidden to connect the charger to
the AC power supply without load for a long time without charging.
During the charging process, if the indicator light is abnormal, a peculiar
smell occurs, or the charger case is overheating, stop charging
immediately and repair or replace the charger. During the use and
storage of the charger, be careful not to let foreign matter enter,
especially avoid inflow of water or other liquids, so as to avoid short
circuit inside the charger.
The charger should not be carried with the vehicle. If it is necessary to
carry it, it shall be placed in the tool box after shock absorption
treatment. Do not disassemble or replace the accessories in the charger
by yourself.
Riding:
Do not use until you have read the instructions carefully to understand
the performance of the product; do not lend it to anyone who does not
manipulate the product. Before riding, check if the brakes are working.
When braking, please apply the rear brake first, and then apply the front
brake. Pay attention to the tightness of the brakes. When you find that
the brakes are too loose, you can use a internal hexagonal wrench to
tighten it. Note that the braking distance shall be increased when you are
riding in rain or snow. Applicable age: 16 to 65 years old.
Be sure to wear a safety helmet while riding it, follow the traffic rules, and
do not drive on motorized lanes and roads with many pedestrians.
Please check the tire pressure before riding. The recommended tire
EN-1