Proper Use; Installation Instructions - NUKI BRIDGE Mode D'emploi

Proper use

the Nuki Use Nuki Bridge only in enclosed rooms and only with the intended power
ans Nuki outlets with a mains voltage of 100–240V AC (50/60 Hz).
o other
Only use the version with the contact pins (type C, G or I) that match the
power sockets in your country.
Operating temperature: 10–40°C, maximum humidity 95%, non-
condensing.
BS Any other use is deemed improper and shall result in an exclusion of
warranty and liability.
2.11 b/g/n

Installation instructions

Plug the Nuki Bridge into a socket in the immediate vicinity of the Nuki
actuators. To ensure a reliable connection between the devices, a maximum
5 A, distance of 5 meters should not be exceeded.
EN
11