Adjusting The Brakes - byACRE Carbon Overland Mode D'emploi

English
Good choice! We know that you will love the Carbon Overland rollator - A tribute to freedom,
curiosity and exploring. You have just bought the most versatile all-terrain rollator out there.
Tough and lightweight at the same time.
Technical specifi cations and overview of accessories are available toward the end of the user manual.
Brakes
Carbon Overland is equipped with two independent brakes acting on the rear wheels.
1. Pull the brake levers upwards to activate the brake. The lever moves back to the neutral position
when the brake lever is released.
2. The parking brake is activated by pressing the brake lever down until you hear a click sound.
Release the parking brake by pulling the brake lever back to the neutral position.
Always engage both parking brakes when you sit on the seat.
Under normal circumstances both brakes should be activated simultaneously.
Be aware that when only one brake is activated, Carbon Overland will turn to the same side as
the engaged brake.
Do not store with the parking brake activated as prolonged activation of the parking brake can
leave visible marks on the wheel and decrease the braking performance.

Adjusting the brakes

The brake should be adjusted if the brake force applied to the wheel is insuffi cient (this can occur
if the tyres are worn) or the parking brake is diffi cult to activate (which is most often seen after
replacement of a worn down tire). Always set the handle to the desired height before the brake is
adjusted as the position may cause a little variation of the brake adjustment.
6
CLICK!