Wall Mounting - ohmex HET 4530 FIRE Manuel D'utilisation

HET 4530 FIRE
b. Wall mounting
☞
Before fixing the brackets (5a and 5b) to the wall check the wall
characteristics and use the most suitable screws type.
- Place the bracket (5a) against the wall, level it and draw the drilling points.
☞
Maintain the minimum distances indicate in the figure (the
minimum height from the floor is 300mm).
To place the appliance at about 600mm from the floor for an optimal flame
view is advised.
1050 mm
min. 750
- Drill the wall with a 6mm drill bit.
Before creating the holes, make sure that there are no electric or
hydraulic hoses where you need to drill.
INSTALLATION
5a
ø 6 mm
EN
85