Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Operation
Remove/replace the stand
The stand is connected to the camera by a magnet.
If you want to remove the stand to hang the camera on
the wall or replace the SD card, simply pull the stand
off of the camera. To replace, just snap it back on the
camera.
Honeywell Home app experience
When you launch the application, your Home screen is
displayed.
All of your devices (cameras, thermostats, water leak
detectors, etc.) are displayed. Select a camera from the
list to view live video from that camera.
Testing smoke/CO alarm detection
If your smoke or carbon monoxide alarm goes off and your camera is on, it
will send you an alert that a smoke or CO alarm has been detected.
To test this feature, press and hold the Test button on your smoke/CO
detector for at least 5 seconds or 3 cycles of the detector's alarm. A shorter
test might not trigger a sound event.
5
Publicité
Table des Matières
