Publicité
Left Hand Wrapper
(High Side)
1) Remove existing wrapper by removing
the (4) screws from bottom.
2) Screw trim piece to wrapper
with (2) screws (provided)
3) Re-install wrapper with (4) screws.
4) Dispose of unused
cover plate.
Left Hand Wrapper
(Low Side)
1) Remove existing wrapper by removing
the (4) screws from bottom.
2) Clip cover plate, sliding until plate sits
flush with the wall.
3) Re-install wrapper with (4) screws.
4) Dispose of unused trim piece.
HTVZDBL*1C
HTVZDBLWF*1C
Wrapper Fill
Piece Location
(Left Side High)
HTVZ8BL*1C
HTVZ8BLWF*1C
Versatile Wrapper and Trim Kit
Installation Instructions
Wrapper Fill
Piece Location
(Right Side High)
PAGE 5
Right Hand Wrapper
(Low Side)
1) Remove existing wrapper by removing
the (4) screws from bottom.
2) Clip cover plate, sliding until plate sits
flush with the wall.
3) Re-install wrapper with (4) screws.
4) Dispose of unused trim piece.
Right Hand Wrapper
(High Side)
1) Remove existing wrapper by removing
the (4) screws from bottom.
2) Screw trim piece to wrapper with (2)
screws (provided)
3) Re-install wrapper with (4) screws.
4) Dispose of unused cover plate.
1000002723 (Rev. B - 01/19)
Publicité
