Publicité
OPERATING INSTRUCTIONS
Explosionproof Pressure Transducers / Transmitters
for use with Liquids and Gases
AST4600 AST46HA AST46PT AST46SW
Measurement Specialties Inc. explosionproof transducers comply with the following
hazardous locations: EN 60079-0:2012+A11:2003, EN 60079-1:2014, EN 60079-31:2014
• ATEX: Class I, Zone 1, Ex d IIC T5 Gb (Ta = -40°C to 85°C)
• Ex d IIC T5 Gb, Ex tb IIIC T100˚C Db
• Class I, Div. 1, Groups A, B, C, D T5
• Class II, Div. 1, Groups E, F, G; Class III*
• Ambient Temp: -40 to 85°C (-40 to 185°F)
• Process Temperature: -40 to 125°C (-40 to 257°F)
• Single Seal
TE CONNECTIVITY SENSORS
/// EXPLOSIONPROOF OPERATING INSTRUCTIONS
*Gauge and vacuum reference units not suitable for Class II. Refer to data sheet.
08/2018
Page 1
Publicité
Table des Matières
Sommaire des Matières pour TE Connectivity AST4600
- Page 1 OPERATING INSTRUCTIONS Explosionproof Pressure Transducers / Transmitters for use with Liquids and Gases AST4600 AST46HA AST46PT AST46SW Measurement Specialties Inc. explosionproof transducers comply with the following hazardous locations: EN 60079-0:2012+A11:2003, EN 60079-1:2014, EN 60079-31:2014 • ATEX: Class I, Zone 1, Ex d IIC T5 Gb (Ta = -40°C to 85°C) •...
-
Page 2: Important Safety Instructions
CAUTION utilisé avec le symbole d’alerte de sécurité, indique un danger situation qui, si elle n’est pas évitée, pourrait entraîner des blessures mineures ou modérées. TE CONNECTIVITY SENSORS /// EXPLOSIONPROOF OPERATING INSTRUCTIONS 10/2018 Page 2... -
Page 3: Electrical Installation (Raccordement Electrique)
0 de la zone. Potential Electrostatic Discharge Hazard - clean the surface with a damp cloth. (AVERTISSEMENT) Décharge potentiel électrostatique Hazard - nettoyer la surface avec un chiffon humide. TE CONNECTIVITY SENSORS /// EXPLOSIONPROOF OPERATING INSTRUCTIONS 10/2018 Page 3... -
Page 4: Special Conditions For Safe Use
Do not use the body / housing for installation. Maximum working pressure for the lowest pressure sensors 0.34MPa (50 psi) and maximum working pressure for the highest pressure sensors 137.9MPa (20,000 PSI) -- SINGLE SEAL. TE CONNECTIVITY SENSORS /// EXPLOSIONPROOF OPERATING INSTRUCTIONS 10/2018 Page 4... - Page 5 OPERATING INSTRUCTIONS Explosionproof Wiring AST4600, AST46HA AST46PT AST46SW Outline Drawing, Explosionproof with Metal Conduit and Cable TE CONNECTIVITY SENSORS /// EXPLOSIONPROOF OPERATING INSTRUCTIONS 10/2018 Page 5...
- Page 6 TE Connectivity‘s obligations shall only be as set forth in TE Connectivity‘s Standard Terms and Conditions of Sale for this product and in no case will TE Connectivity be liable for any incidental, indirect or consequential damages arising out of the sale, resale, use or misuse of the product.