Publicité
L930-B4
Exterior Spotlight
Parts
LED unit x 1
Canopy x 1
Universal crossbar x 1
Mounting screws x 4
Waterproof wire nut x 2
Allen key — Included
1) Follow instructions for Mounting Kit
(MK3)
2) Once electrical box is in place connect
fixture leads to box wiring using
supplied waterproof wire nuts. Line
voltage power must be off before
connecting driver.
3) Align crossbar to electrical box and
attach with two screws.
4) Mount canopy to crossbar by hooking
one side of the crossbar on first then
secure the otherside by tightening set
screw (M4) with provided allen key.
5) Adjust and lock angle of fixture by
tightening set screw (M3) with allen
key.
Optional: Apply weather proof bead of
silicone all the way around canopy and
gasket.
For outdoor application use exterior
rated enclosure compatible with
local electrical code.
For cast in concrete use appropriate
box rated for cast in concrete.
Consult local electrical code.
www.mplighting.com t 1.877.708.1184 f 604.708.1185
Allen key
M3 set screw
Allen key
M4 set screw
All technical information in this document is subject to change. Copyright © MP Lighting.
B4 Canopy
& LED unit
Mounting
Screws
Universal
crossbar
Gasket
Waterproof
wire nut
4" waterproof
electrical box
EBX1-MK2
01-2021
Publicité
