ErrorIndication; Remote Control Problems - Kimex 018-7064 Manuel De Montage

Masquer les pouces

Table Des Matières

Table des Matières

Les langues disponibles

4. Reset Mode

If the TV mount can't be adjusted to the highest position(0 degree against

the ceiling) or the lowest position (max. tilting position), unplug and re-plug

the power. Then press and hold the "

retract to the highest position, that means the system has been

successfully reset.

5.Reset the Tilt Range for Pitched Ceiling

The TV mount is 0°~75° adjustable by default. Please reset the tilt range

if you use as a pitched ceiling TV mount.

Prepare: Reset the system (see Instructions on A. Button Functions - 4.

Reset Mode).

Step 1: Press "

Step 2: Press and hold the "

this step 5 times. The unit will emit a long beep to indicate success.

Note: Step 1, 2 should be finished in 2 minutes, or it will fail to reset.

Note: The remote controller is powered by two AAA batteries (not included).

B. Manual Mode

In any position (but the minimum position against the ceiling), when manually push up the TV ceiling mount

over a distance. The TV ceiling mount will automatically return back to the minimum position against the

ceiling.

C. Coding of Remote Controller and Control Box

Step 1:

When the mount is powered on, press the small button on the control box with a thin tool as shown.

The unit emits a beep, indicating that the control box is on standby for program coding.

Step 2:

Press the "

"button on the remote control, and the control box repeatedly beeps for approximate

SET

10 seconds indicating that the remote control is being programmed. The process will be finished

automatically until you can't hear a beep any longer.

Note: The TV Mount can be matched with up to 20 remote controllers. To clean up the data of all the

remote controllers, press and hold the code matching button for 5 seconds then release. The unit will

emits two beeps confirm the successful clean up and vice versa.

" button for 5 seconds. Mount will

", "

" and "

" buttons and adjust to the proper position.

" button until the unit beeps once. Repeat

8. Repair

In Front

This repair guide intents to help you identify and solve the minor problems caused by unusual operation of the

electric system of our electric TV mounts. The simple procedures in this manual are easy to follow and capable of

solving the most problems happened in everyday use.