Kimex 018-7064 Manuel De Montage page 15

6. Attach the Decorative Cover and Route the Cable
Anything is not allowed to pass
through the mount motion space.
11
D
Use the cable ties to hold the cables in place.
Note: Leave slack in the cables for arm movement.
7. Adjust TV to the Desired Position
Do not open the electrical cover please.
Never operate the unit without a TV installed.
Remote Control Operation Instructions
A. Button Functions
RMT-02
remote control
I
1.Upward/Downward Movement
Press the " " button, the TV mount will move upward to the lowest-profile
position against the ceiling. Press the " " button, the TV mount will move
downward to the maximum tilt angle position (75° by default). Press the
" " button to stop the motion. (Tips: Clear up all obstacles within the
OK
range of motion.)
2.Memory Setting
Press the " " or " " button for 1 seconds and you will hear a beep,
indicating that the current position has been saved to memory.
The " " " " buttons can each store a different position.
3.Recall Memory
Press the " " or " " button and the mount will automatically get to the
position saved in the corresponding button "
G
H
" or " ".
12