Enlarging The Picture; Adjusting The Volume - Panasonic PT-LB10NTU Mode D'emploi

Enlarging the picture (D.ZOOM)
POWER
INPUT
VIDEO RGB
AUTO
MENU
SETUP
ENTER
FREEZE SHUTTER
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
The remote control unit functions during D.ZOOM (digital zoom)
Press the F,G,IandHbuttons to move the enlarged area which you want to project.
Press the D.ZOOM +/- buttons to change the enlargement ratio.
Press the MENU button to return to the normal screen.
NOTE:
B The enlargement ratio can be changed within the range of x1 to x2, in
steps of 0.1. When RGB signals are being input, the enlargement ratio
can be changed within the range of x1 to x3, except when the "FRAME
LOCK" is set to "ON".
B If the type of signal being input changes while the digital zoom function
is being used, the digital zoom function will be cancelled.
Adjusting the volume (VOLUME)
STD
VOLUME D.ZOOM
INDEX
WINDOW
PROJECTOR
30-E
NGLISH
Press the D.ZOOM +/- button.
B The picture will then
be enlarged to 1.5
times the normal size.
Press the VOLUME +/- button.
B Press the + button to raise the volume.
B Press the - button to lower the volume.
NOTE:
B You can also select "VOLUME" from the
"MAIN MENU" to adjust the volume.
B The VOLUME button will be disabled when
"NETWORK" is selected. (PT-LB10NTU only)
[