Parts List; Assembly Steps - WerkaPro 10868 Notice De Montage

English
Thank you for choosing this Werkapro deck shelf! The product was delivered to you
unassembled. These instructions explain how to assemble the various components of the
shelf in a simple way. It includes: parts list and assembly steps.
We recommend that you set up your shelf in a spacious and uncluttered room.

1. Parts list

Please check that all the parts are present in the package that was delivered to you. If this is
not the case, please contact our service department.
Large shelf
Foot end
Bars

2. Assembly steps

The assembly of the toilet bridge shelf consists of 6 steps. It is important to note that the rear
reinforcement bar will not be necessary if your toilet is glued to the wall (e.g. hanging toilet).
In order not to make any mistakes during the assembly of the shelf, we recommend that you
read the following instructions in full before proceeding with the assembly of the parts. Also
be careful not to injure yourself with the surface of the pipes.
Small shelf
Screw
Top bracket
End cap
Washer
Bottom bracket
Foot screw