Electrical Connection Instructions; Safety Instructions - Amano American SANDERS Super 7R Mode D'emploi

EN

Electrical Connection Instructions

SAFETY INSTRUCTIONS

This floor-finishing machine shall be grounded while in use to protect the operator from electrical shock. The machine
is provided with a three-conductor cord and a three contact grounding attachment plug to fit the proper grounding type
receptacle. The green (or green and yellow) conductor in the cord is the grounding wire. Never connect this wire to other than
the grounding pin of the attachment plug.
This machine is for use on a nominal 120 volt or 240 volt circuit and has a grounding plug that resembles the plug illustarted
as (A) in the sketch. Make sure that the machine is connected to an outlet having the same configuration as the plug. No
adapter should be used with this machine.
9