Installation of the receiver
The receiver is mounted with the provided screws on the outside of the stove rear wall. The max.
ambient temperature must not exceed 45 °C. Therefore, the receiver must be mounted as far away
from the exhaust pipe near the ground!
Connecting the receiver to wodtke S4/S5 control system
+
+
+
RS 485
BB-S5
C-Box 2
1 2 3 4
EIN
LMS
AUS
- OFF -
1 2
PC-Tool 2
Bedienboard
EN
receiver
Ausgang
Fühler
FKY
-
Eing.
Modul.
+
mA
V
mA
V
Eingang
Min/Max
white
Eingang
Ein/Aus
brown
Eingang
Reserve
green
yellow
77