wodtke FT 1 Mode D'emploi page 76

Following adjustments are possible:
High Temp (HIT):
Low Temp (LOT):
Frost protection (FRT): Set anti freeze minimum temperature value from +3°C to +7°C (default: 5°C)
Regulation (REG):
Service mode (S_R):
Differential (DIF):
Keypad Lock (LOK):
Operating hours (OPT): This feature shows total operating running time (max. 99.999 hours)
Battery Level (BAT):
76
Set maximum temperature value for programming
from low temperature value up to +32°C (default: +32°C)
Set minimum temperature value for programming
from +7°C up to high temperature value (default: +15°C)
Possibility to select between PID or 2 points regulation (default: 2 points)
ATTENTION: Setting "2-point regulation" is required!
For internal use only! Please do not change!
Possibility to modify differential value from 0,1 K to 0,9 K
(default: 0,4 K, recommendation: 0,5 K)
Enable keypad to protect against non authorized interventions.
To enable/disable the keypad lock press and hold
more than 3 seconds.
battery charge level is shown on display.
- and -button for
MODE ESC