Preparation - Overmax AD-02 Manuel De L'utilisateur

•
Supply voltage:
•
Optimal usage conditions:
Temperature
Relative humidity
•
Display:
•
Dimensions:
•
Single charge working time: >200 tests
1. Product illustration
and preparation

Preparation

1.
Install the batteries: Slide the rear cover down.. Install 2 AAA
alkalinebatteries1.5V. Slide the cover back in place.
2.
After the batteries are installed the device starts the
initialization. During the process the „INITIALIZE" message flash
on the screen for 1 minute. When the initialization is completed
the breathalyzer can start a test.
EN
DC 3.0V, 2 AAA batteries;
0°C - 40°C
40% - 90%
digital LED
108 x 40 x 16mm (LxWxH), <45g
1. Interchangeable mouthpiece
(cap)
2. Folding mouthpiece
3. LED display
4. Power button