Fysic FKW-2600 Guide De L'utilisateur page 28

the clock time manually. During the manual setup, several other
All manuals and user guides at all-guides.com
functions may be set.
Press and hold the "MODE/SET" button for 3 seconds until
the time zone starts flashing. Use the "▲" and "▼" buttons to
set the values. Press the "MODE/SET" button to confirm each
step.
You may set the following functions.
12/24 hours RCC on/off time zone day display language
hours minutes seconds year
month day temperature alarm signal length
RCC on/off: To switch the DCF-77 receiver on or off.
seconds: When setting the second, it'll turn to 0.
temperature: To set the temperature display to °C or °F. Se-
lect the desired display.
When the thermometer value falls outside of the measurement
range, the display will show: LL.L (below the minimum tem-
perature) or HH.H (above the maximum temperature)
alarm signal length: To set the maximum duration of the
alarm signal when the wake-up time is reached (1 or 2 min-
utes).
day display language: To set the desired language in which
the days must be displayed.
-28-