Fysic FKW-2600 Guide De L'utilisateur page 27

All manuals and user guides at all-guides.com
Batteries:
Open the battery cover by depressing the tab
and pressing is forward. Insert 4 x 1.5V - AA
size batteries (Penlite-LR6). Preferably, use
alkaline batteries. When inserting the batteries,
please observe the polarity. Afterwards, close
the battery cover.
Clock:
After inserting the batteries, the clock starts synchronizing with
the DCF-77 time signal. The DCF-77 reception icon
flashing to indicate that the DCF-77 signal is being received.
flashing
busy receiving the DCF-77
signal
The clock automatically starts synchronizing with the DCF-77
signal at 3am.
You may also manually synchronize the clock by pressing and
holding the
flashing.
The synchronizing process will take several minutes.
The other buttons won't function while synchronizing.
During summer time the
Daylight Saving Time.
To manually set the time:
If it's not possible to receive the DCF-77-signal, you may set
INSTALLATION
DCF-77 signal reception
button for 3 seconds. The reception icon
MODE / SET
ON
ALARM
OFF
MON
-
FRI
on
successful
icon appears. DST stands for
-27-
SNOOZE
reset
ALARM
MON
-
SUN
no DCF-77 signal received
AA 1,5V
AA 1,5V
AA 1,5V
AA 1,5V
starts
off
starts