Jole bold booster Manuel D'utilisateur page 10

!
Make sure that both Isosafe
connectors are securely
attached to their ISOFIX
anchor points. The colors of
the indicators on both Isosafe
connectors should be
completely green.
26
!
Press the Isosafe connectors
button and push the base
24
back against the vehicle seat
until tight.
Removing the base
1. To remove base from the
vehicle press the release button
and pull the base back from
24
the seat.
27
2. Then press -1 and pull back
28
on the Isosafe connector.
17
26
27
28
-2
28
1 2
3. For transporting base, press
Isosafe connectors button
and move back Isosafe
connector so it is folded
completely.
29
GROUP 1 (9-18kg) &
GROUP 2 (15-25kg)
With Isosafe system + 3-point-belt + top tether +
harness buckle
see images -
30 34
1. Press the webbing adjustment
button, while pulling out the
shoulder harnesses to the
proper length.
30
2. Press the red button to
disengage the buckle.
31
29
24
30
31
18