Middle Atlantic Products RFR Serie Mode D'emploi page 8

INSTALLATION (CONTINUED)
3. Use (2x) wood screws (B) in the vertical position
and the thread cutting screw (C) in the horizontal
position to attach the unit to the cabinet.
(FIGURE C)
NOTE: Be careful not to strip the threads when
attaching the thread cutting screw.
E
Temperature
Probe
D
FIGURE D
NOTE:
• An adhesive tie saddle (E) comes pre-attached to the unit. Use a wire tie (F) on the saddle to secure
the teperature probe. (FIGURE D)
• An an alcohol wipe (G), along with additional wire ties (F) and tie saddles (E) are provided for cable
management.
WARRANTY
For warranty information, refer to http://www.middleatlantic.com/company/about-us.aspx#warranty
Corporate Headquarters
Corporate Voice: 973-839-1011 - Fax: 973-839-1976 / International Voice: +1 973-839-8821 -
Fax: +1 973-839-4982
www.middleatlantic.com - info@middleatlantic.com
Middle Atlantic Canada
Voice: 613-836-2501 - Fax: 613-836-2690 / ca.middleatlantic.com -
customerservicecanada@middleatlantic.ca
Factory Distribution
USA: NJ - CA - IL Canada: ON - BC
At Middle Atlantic Products we are always listening. Your comments are welcome.
Middle Atlantic Products is an ISO 9001 and ISO 14001 Registered Company.
4. Connect power cable on the unit to the power
5. Plug power supply (D) into AC outlet.
Power Cable
Page 8
B
FIGURE C
supply (D). (FIGURE D)
C