Middle Atlantic Products RFR Serie Mode D'emploi page 7

FEATURE SET
D
C
B
A
Bottom
A. Control Circuit: NOTE: Do not block.
B. Turn on Temperature: The blower will turn on at 87° F (30.5° C) and run proportionately
(speed increases with temperature) from 87° F (30.5° C) to 95° F (35° C). At 95° F and above,
the blower will run at full speed. The blower will stop running at 85° F (29.4° C).
C. Product Revision Level: Current revision level of your RFR-CABCOOL50.
D. Manufacturing Date Code: Denotes the date the RFR-CABCOOL50 was manufactured.
E. Temperature Probe: Temperature detection probe, (5", permanently fixed to unit).
F. Power Connector: Connects to a 12V 1A power supply (supplied).
G. Power LED: Blue LED that illuminates when the unit is receiving power.
INSTALLATION
1. Use hammer to knock out perforated rear
vent panel from the cabinet as shown.
(FIGURE A)
NOTE: Top of cabinet removed for clarity.
Power Cable
FIGURE B
E
F
2. Insert power cable and teperature probe on unit (A)
into rear cutout and slide unit into rack until flush with
back panel. (FIGURE B)
A
Page 7
G
Front
FIGURE A