Connecting The Device - Garmin PACK COMMANDES VOCALES USB Instructions D'installation

Connecting the Device

You can permanently damage your ears and lose hearing if you listen to the device, earbuds, or headphones
at high volume. If you experience ringing in your ears or muffled speech, stop listening and have your hearing
checked.
1 Turn off the Garmin chartplotter.
®
2 Insert the Bluetooth USB device
®
3 Screw the USB cable into the micro USB port on the Garmin chartplotter
4 Route the cable and secure the end containing the Bluetooth USB device.
NOTE: The Bluetooth USB device requires a minimally obstructed line of sight to maintain a strong
connection with a headset. Avoid placing the USB device directly behind the chartplotter or other potential
sources of interference such as metal panels.
5 Test the connection strength with the Bluetooth USB device and paired headset in their respective intended
location and orientation, and relocate the device if needed.
Changing the Voice Control Language on a Garmin Chartplotter
You must enable voice control on your Garmin chartplotter to use the Voice Control USB Bundle.
1 On the chartplotter home screen, select Settings > System > Sounds and Display > Voice Control.
2 Select Voice Control > Voice Language.
3 Select the voice control language.
NOTE: The voice control language can be different than the text language.
September 2022
VOICE CONTROL USB BUNDLE
INSTALLATION INSTRUCTIONS
WARNING
into the included USB cable and close the weather cap.
.
GUID-CA004AE0-F559-4982-B6FD-C3ADA7CC9D2B v2