Safety Instructions; Connecting The Power Cable - auna Dark Star 2000 Mode D'emploi

EN
16

SAFETY INSTRUCTIONS

• These operating instructions are intended to familiarise you with the
operation of this product. Therefore, always keep these instructions in a
safe place so that you can access them at any time.
• When you purchase this product, you receive a two-year warranty
against defects when used properly.
• Please use the product only in its intended manner. Any other use may
lead to damage to the product or in the vicinity of the product.
• Modifying or changing the product will compromise product safety.
Attention: risk of injury!
• Never open the unit without authorisation and never carry out repairs
yourself!
• Handle the product carefully. It can be damaged by bumps, blows or
falls from a small height.
• Keep the product away from moisture and extreme heat.
Special warnings
• Repairs to the device should only be carried out by an authorised
specialist workshop.
• Do not open the device under any circumstances.
• Incorrect assembly may lead to malfunctions or total failure.
• The device should be protected from any moisture and direct sunlight.
• Do not clean the appliance with detergents.
• Only use a dry (microfibre) cloth for cleaning.
• Only connect the appliance to the designated power supply.
• Never connect the appliance to voltages other than those intended.
• The warranty is void if the unit is tampered with by third parties.

CONNECTING THE POWER CABLE

• As this is a high-current unit, the connection of the power cable is very
important.
• Connect the red cable to the (+) terminal of your battery using the cable
with the fuse holder.
• Connect the black cable firmly to a screw or another part of the
bodywork of your car after you have removed the paint. This is
necessary for proper earthing.
• Proper wiring leads to clear sound.