CenturionPro TAbletop pro Mode D'emploi page 8

BLOWER CLEANING
For optimal performance and life, the BLOWER components must be cleaned every 6 to 7 days of use.
INSTRUCTIONS:
Clean with pressure washing at 1500-2000 PSI, Hot Water, Fan Spray setting. Run BLOWER for
15 minutes after washing, allowing components to dry. Avoid water contact on bearings.
STEP 1
Remove the COVER and
IMPELLER from the BLOWER
Blower Bag
STEP 2
Pressure wash the IMPELLER and
the interior of the BLOWER
Clean the
entire interior
of the blower
Blower
Tilt the BLOWER to
allow drain from
the OPENING
turn inside-out
Cover
Remove
eight screws
Blower Bag
Turn BLOWER BAG inside
out from the ZIPPER and
Shake vigorously to
remove all debris
Zipper
allow to dry