Replacing The Light Bulb - WindCrest WST300SBG Guide D'utilisation, D'entretien Et D'installation

REPLACING THE LIGHT BULB:

WARNING:
DIsconnect the hood from electricity and be sure the lights are cool.
If new lights do not operate, make sure the light bulb is inserted correctly before calling service.
• Using a flat head screwdriver or equivalent tool, carefully pry loose the light cover.
• Remove the damaged light and replace with a new 12 Volt, 20 Watt (Maximum) halogen light made for a G-4 base
SUITABLE FOR USE IN OPEN LUMINAIRES. Follow package directions and do not touch new light bulb with bare
hands.
• Reinstall the light cover.
17
www.windcrestcnp.com