PNI House 910 WiFi Manuel Utilisateur page 12

side of the screen
5. From the list of devices on the right side of the screen,
select the Smart doorbell option
6. With a sharp object, long press the Reset button on the
door phone.
7. The door phone enters the configuration state.
8. In the next interface, select the QR Code option in the
upper right corner, then check Make sure the indicator is
flashing quickly or a prompt tone is heard.
9. Select the WiFi network you want to connect to and enter
the password.
10. Move the QR code closer to the door phone's camera 15-
20 cm away.
11. In the the door phone you will hear the Connecting to WiFi
prompt.
12. The application will scan nearby devices.
13. After identifying your door phone, you will hear the
Camera is now online prompt.
14. In the application you will see the message Added
successfully. Click on Done to return to the home interface.
Note: after adding the door phone in the application, other users
will be able to add it in their phone, only if you activate the Share
device option.
12 - User manual