Table des Matières
Publicité
Specifica ons
1. The machine is simple in structure and extra long li range
2. Light in Weight
Rated load : 600 kg
Min height of saddle : 1100 mm
Max height of saddle : 1900 mm
Net weight : 34 kg
Dimensions : 1120x230x280 mm
Modalités d'u lisa on
Warning ! Before use ensure you have read, understood and apply safety instruc ons. Ensure
you prepare vehicule correctly before a emp ng to use the transmission jack.
Posi oning jack beneath load. Before use ensure the transmission weight and size does not
exceed the capacity of the jack.
Lowering the load. Ensure the load is central and stable on the jack saddle and load is fixed in
place before a emp ng to li , lower, or transport.
Slowly turn the release valve knob an -clockwise to gently lower saddle to the lowest
minimum height before a emp ng to transport load.
Ensure the jack's descent is slow and controlled to avoid the risk of sudden dropping which
could be dangerous. The valve will automa cally return to the closed posi on when the knob
is released.
Transpor ng the load. Ensure you have read, understood and apply safety instruc ons.
Entre en
Only fully qualified personnel should a empt maintenance or repair.
When the jack is not in use, the saddle must be in the lowest posi on. Keep the jack clean
and wipe off any oil or grease. Lubricate all moving parts with acid free oil. The oil cylinder is a
sealed unit and must not be accessed. For service contact your authorised dealer.
Only a good quality jack oil must be used, DO NOT use brake fluid. Before each use, follow the
pre-check list to ensure components are in good working order. DO NOT use the jack if you
believe it has been subjected to an abnormal load or shock. Periodically check the pump
piston rod for signs of corrosion. Clean exposed areas with a clean oiled cloth.
3. Saddle adjustable
-3-
Publicité
Table des Matières
