aqprox APP500PS Mode D'emploi page 7

Chapter 1. Introduction
The power supply APP500/550/650PS provides all the power needed for the functioning
of the ultimate generation computers while saving energy.
This PC power supply has an ultra quiet fan and can meet the expectations of the most
demanding users.
Chapter 2. Package Contents
• Approx Desktop Power supply
• C.A. Power Cable
• Quick Installation Guide in several languages
Chapter 3. Istallation
Change your old power supply if necessary.
• Turn off your computer, unplug the power cord from the back and remove the
computer case.
• Identify all power cables connected to the hardware inside the computer and
disconnect them.
• Unscrew the 4 screws on the back of the power supply and remove the old power
supply.
Installation of Approx power supply.
• Place the power supply in the preset area of the computer's cover and secure with 4
screws at the rear of the enclosure.
• Connect all power cords that come to the computer hardware, for more information,
consult the manual for the motherboard of your computer.
• Select the correct voltage on the switch 115/230V (230V Spain) from the back of
the power supply.
• Connect the supplied power cord to the power supply and power outlet in your
home.
• Close the computer case, change the on / off switch to the on position in the rear of
the power cord and turn on your computer.
For more information on installing and configuring this product please contact our
support section on our website www.approx.es or write an email to the following address:
soporte@approx.es.
7