Attach Hoses To Pressure Washer; Plug Gfci Into Power Receptacle - Ford FPWE1800 Manuel D'utilisation

Step 4 - Attach Hoses to Pressure Washer
• Connect the garden hose to a water supply and turn the water on for a few seconds to flush out any debris that may
have collected in the hose.
• With the water supply turned off, connect the garden hose to the hose inlet on the front of the machine.
• Turn water supply back on.
Never connect the pressure washer to a hot water supply. Hot water will destroy the pump
WARNING!
and overheat the motor and void the warranty.
Step 5 - Plug GFCI into Power Receptacle.
Plug in the GFCI into a power receptacle. Firmly press and release the test button, then press and release the reset button.
The light on the GFCI should be illuminated.
ASSEMBLY
Garden Hose Connection
11