Synca rei FM250 Manuel De L'utilisateur page 6

Troubleshooting
Check points
The noises occur from internal parts
A "clatter", friction, air
due to the mechanical design when
exhausting or the
the product is in use. They will not
compressor's noise when
have any effect on the operation of
the product is in use.
the unit.
Check whether the power
plug falls off.
Check whether the POWER ON/OFF
button has been turned on.
The unit does not start up.
Check whether no massage function
has been selected.
Protection from overheat.
Sudden cease of operation. The rated operating time has elapsed.
Contact the dealer or its service agent if the problem still persists after checking in accordance
with troubleshooting.
WARNING
There is battery inside the product, pay attention to the following:
• Risk of fire and electric shock.
• For dry location use only.
• Do not short circuit.
• Do not disassemble or reassemble this device.
• Do not use it without instruction.
Follow local government regulations to dispose electrical appliances properly.
Prior to dispose electrical appliances, battery should be removed. Dispose of battery safely.
Troubleshooting
No need for any actions.
Plug in the power plug.
Turn on the power switch.
Select a massage function.
Turn off the power. Restart
the unit after 30-min break.
Turn off the power. Restart
the unit after 10-min break.
Specifications
Product: rei Foot-Calf-Lumbar-Ottoman Massager
Model: FM250
Rated voltage: 24V
Rated power: 45W
Rated time: 15 minutes
Adaptor model: XH2400-2500
Adaptor input: 100-240V~, 50/60Hz
Adaptor output: 24V 2.5A
Battery capacity: 2600mAh
Battery charging time: 3~5 hours
Battery run time on a full charge: 55 minutes
Product dimension: L476 x W461 x H474 mm
Product weight: 14.3KG
Materials: PVC, ABS
Country of Origin: China
Safety design：
WARNING
For the purposes of recharging the battery, only use the detachable supply unit provided with this
appliance.