Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
50001137-001, 50002883-001 COVER PLATE ASSEMBLIES
Mount Small Cover Plate to a Horizontal 2 in. X 4 in. Electrical Box (See Fig 4)
1. Pull the wires through the wire hole on the cover plate and wall plate. Position the cover plate and wall
plate on the electrical box with the arrows pointing up.
2. Insert two #6-32 X 5/8 flat head screws. Check leveling, if desired, and tighten the flat head screws.
Fig. 4. Mount cover plate, wall plate and thermostat to a horizontal 2 in. X 4 in. electrical box.
Resideo Technologies, Inc.
1985 Douglas Drive North, Golden Valley, MN 55422
1-800-468-1502
69-2660EFS—02 M.S. Rev. 03-20 | Printed in United States
www.resideo.com
© 2020 Resideo Technologies, Inc. All rights reserved.
The Honeywell Home trademark is used under license from Honeywell International, Inc. This product is manufactured by Resideo Technologies, Inc. and its affiliates.
Tous droits réservés. La marque de commerce Honeywell Home est utilisée avec l'autorisation d'Honeywell International, Inc.
Ce produit est fabriqué par Resideo Technologies, Inc. et ses sociétés affiliées.
Todos los derechos reservados. La marca comercial Honeywell Home se utiliza bajo licencia de Honeywell International, Inc.
Este producto es fabricado por Resideo Technologies, Inc. y sus afiliados.
ELECTRICAL BOX
WIRE
COVER PLATE
WIRE HOLE
MOUNTING HOLES (2)
WALL PLATE
WIRE HOLE
MOUNTING HOLES (2)
#6-32 X 5/8 FLAT HEAD
SCREWS (2)
THERMOSTAT
M22393A
Publicité
Table des Matières
