Set Up Camera On Reolink Client (For Pc) - Reolink Argus 2 Mode D'emploi

Set up Camera on Reolink Client (For PC)

Please download the Reolink Client software from our official website:
https://reolink.com/software-and-manual/
It's recommended to set up the camera on Reolink App first before adding the
NOTICE:
camera to Reolink Client.
Launch the Reolink Client software and manually add the camera to the Client. Please
follow the steps below.
• In Same Network
(In LAN)
1. Click "Add Device" on the
right-side menu.
2. Click "Scan Device in LAN".
3. Double click on the camera you
want to add. The information will
be filled in automatically.
4. Input the password created on
Reolink App to log in.
5. Click "OK" to log in.
6 English
and install it.
• In Different Network (In WAN)
1. Click "Add Device" on the right-side menu.
2. Choose "UID" as the Register Mode.
3. Type in the UID of your camera.
4. Create a name for the camera displayed on Reolink Client.
5. Input the password created on Reolink App to log in.
6. Click "OK" to log in.
To save power, the
NOTICE:
camera will log out if no
operation is conducted for
about 5 minutes. You need to
log in the camera again by
clicking the " " button.
English 7