Regalo Expandable Manuel Du Propriétaire page 5

Installing Your Gate
STEP 1
Place your expandable gate in an opening no smaller than 28 inches and
no larger than 42 inches wide.
NOTE: If the opening has a baseboard or molding near the floor, be sure to
place the gate above the molding so that the gate is installed on a vertically
even surface.
STEP 2
With one hand on each side
of the gate frame, pull away
from the center until the
gate spans the entire length
of your doorway or opening.
NOTE: Be sure to pull from the outside frame of the gate, NOT the inner bars.
All manuals and user guides at all-guides.com
English 5