Table des Matières
Publicité
Maintenance
1.888.753.7137
2. Clean Air Passages
• Remove rain cover, sticky trap, FineTune
ring and lure.
• Locate all screws and/or bolts that connect
engine cover to engine body. See
illustration 3.
Note: certain models require you to cut a
hole through the labels.
• Remove engine cover by removing screws
and/or bolts and unplugging lighting.
See illustration 4.
• Spray dirty engine body, fan area and
engine cover with glass cleaner (i.e.
®
Windex
) or a citrus based degreaser. See
illustration 5.
NOTICE – Never use cleaning fluid or
petroleum based fuels and avoid contact with
LED lighting and fan motor to avert damage.
• Allow cleaners to soak in then wipe all
surfaces clean and dry with a cloth. See
illustration 6. If there is stubborn build-up,
remove it by scrapping with a plastic knife.
See illustration 7.
• Reconnect LED lighting and plastic engine
cover. Replace sticky trap, FineTune
lure and rain cover.
3. Clean Turbo Scoop
™
• Remove WaveDrawer
and remove engine
from post or cart.
• Remove plastic plug in bottom of metal
engine by reaching up through exhaust
hole. See illustration 8.
• Turn engine head upside down to remove
debris from turbo scoop.
• Replace plastic plug. Place engine back on
post or cart and replace WaveDrawer
4. Reconnect regulator to tank by turning
clockwise. Perform leak test before re-
starting.
3
®
4
5
6
®
ring,
7
™
.
8
Page 10
Publicité
Table des Matières
